On30 Guy Boxcar Kit Assembly Sequence
It occurred to me that there may be some kits floating around out there and the owners hadn’t downloaded the assembly guide yet. So, here it is: Download here
DelTang Tx21 Assembly Guide
This is the assembly guide that I did for the DelTang kit, which is no longer available. The Tx2 module it’s based on is still available from DelTang, and a schematic is included in the manual. Download here
Simple DelTang Receiver Wiring
About the easiest way to wire a DelTang receiver. This is based on using a plug-in battery pack similar to the Turnigy packs I was selling. This is intended to be a guide, as there are many ways to wire the receiver.
Adapter Cable for Charging 1S or 2S LiPo Packs
As mentioned elsewhere, 2S (two-cell) LiPo packs must be balance charged. The adapter allows either a 1S or a 2S battery pack wired with only a JST-XH connector (3-pin) to be charged using the iMAX B6 or B6AC charger. The charger comes with several adapters to connect the discharge connector on many packs. One of…
Making Your Own 2-Cell LiPo Pack
Making your own LiPo packs is not difficult — it only requires a little care. To make a 2-Cell (2S) pack, you’ll need 2 identical LiPo cells and a female 3-pin JST-XH connector. You can buy the connectors pre-wired, or save a little money and buy raw connectors and a crimp tool and do it…